1·Seamless copper tube is pressed and drawn.
铜管是压制的和拉制的无缝管。
2·By bending soft temper copper tube, a simple form of expansion loop can be made.
通过弯曲回火软处理铜管，可以制作一个简单的膨胀循环回路。
3·Fine copper tube for the output of the compressor pipe cooling, thick return line.
制冷时细铜管为压缩机的输出管，粗的时回流管。
4·Second, the demolition of copper tube, power supply connection between with the house.
拆除室内机与室外机之间的铜管、电源连接。
5·Using ga stainless steel tube or a copper tube, the flow rate in the tube is turbulent.
使用不锈钢管或使用铜管，管内流速都是紊流。
6·So what is the contrast between the stainless steel heat exchange tube and the copper tube?
那么不锈钢换热管和铜管的对比是怎么样的呢？
7·Furthermore, with Q235 steel tube and T2 copper tube, expanding experiments are carried out.
进一步用Q 235钢管和T2紫铜管等材料进行了扩口试验。
8·For compression end connection, first slide compression nut onto copper tube, then slide on ferrule.
对于压缩端口连接，首先将压缩螺母移动到铜管上，然后装上套圈。
9·The wall thickness of thick wall copper tube drawn without plug is calculated by using Zhou-Zhou formula.
本文用双周数表计算了铜合金厚壁管空拔后的壁厚。
10·The cutting wheel of the type specifically designed for cutting copper tube will also do a satisfactory job.
这种类型的切割轮专为切割铜管设计，也能够获得满意的效果。
1·By bending soft temper copper tube, a simple form of expansion loop can be made.
通过弯曲回火软处理铜管，可以制作一个简单的膨胀循环回路。
2·Seamless copper tube is pressed and drawn.
铜管是压制的和拉制的无缝管。
3·Fine copper tube for the output of the compressor pipe cooling, thick return line.
制冷时细铜管为压缩机的输出管，粗的时回流管。
4·Second, the demolition of copper tube, power supply connection between with the house.
拆除室内机与室外机之间的铜管、电源连接。
5·HIMOD flagship series USES interactive "type v" coil, the internal thread copper tube and punched slotted fin, and heat transfer efficiency is higher than the traditional coil unit.
HIMOD系列旗舰型采用了交互“V型”盘管，采用了带内螺纹的铜管及冲缝型翅片，比采用传统式盘管的机组有更高的传热效率。